Features
Model
ASR1002-X-NEW
Details
Router
GigE rack-mountable
Category
Stock
In Stock

Additional information

Brand

Cisco

  • Description
  • Specifications
The Cisco ASR 1002-X router offers embedded services for enterprise and service provider networks in a 2-rack unit small form factor. It is integrated with a route processor, embedded services processor, and SPA interface processor. Running on Cisco IOS XE software, the Cisco ASR 1002-X supports software redundancy without redundant hardware. The ASR 1002-X is ideal for high-end enterprise branch offices, and as a high-performing edge solution for a private WAN.

 

Physical specifications
Note: Depth applies to chassis edge-to-edge dimension and does not include
protrusions such as card handles, power-supply handles, and cable management brackets.
Refer to the applicable hardware installation guide for additional details.
Height: 3.5 in. (88.9 mm)

Width: 17.2 in. (437.4 mm)

Depth: 18.15 in. (461.0 mm)

Weight:

   38.25 lb (17.36 kg) (with dual AC power supply and SPA blank covers)

   39.05 lb (17.72 kg) (with dual DC power supply and blank covers)

   No SPAs included

Note: The Cisco ASR 1002-X has the route processor, ESP, and SIP integrated.

Default memory 4-GB DRAM shared across route processor, ESP, and SIP
Number of SIPs or Ethernet line cards supported Integrated in chassis
Shared port adapters 3 SPA slots
Ethernet port adapters N/A
Cisco ASR 1000 Series ESP Integrated in chassis
Route processor Integrated in the chassis: Cisco ASR 1002-X Series Route Processor with Quad Core Processor
Redundancy Software: Yes
Built-in Gigabit Ethernet ports Yes: 6 Gigabit Ethernet SFP ports
Built-in 10 Gigabit Ethernet port No
Network interface module No
Cisco ASR 1000 Series Cisco ASR 1002-X
ESP support Cisco ASR 1002-X ESP with 5-Gbps (default)

Upgradable through software-activated feature license to 10, 20, or 36 Gbps

ESP bandwidth 5 to 36 Gbps
ESP memory Share the same control memory on the route processor
SIPs and Ethernet line cards Integrated in chassis: not upgradable
Embedded hardware-based encryption Yes: Up to 4-Gbps crypto support throughput
Minimum Cisco IOS XE Software release Cisco IOS XE Software Release 3.7.0S
Rack-mounting Yes: 19-inch
Wall-mounting No
External USB flash memory 1-GB USB flash-memory support
Redundant power supply Same as for Cisco ASR 1002
Power input Same as for Cisco ASR 1002
Power consumption    Maximum (DC): 590W

   Maximum (AC): 560W

   Maximum (out): 470W

Airflow Front-to-back
Operating temperature (nominal) 32 to 104 F
(0 to 40 C)
Operating temperature (short-term) 32 to 122 F
(0 to 50 C)
Operating humidity (nominal) (relative humidity) 10 to 85%
Operating humidity (short-term) 5 to 90%
Storage temperature -40 to 150 F

(-40 to 70 C)

Storage humidity (relative humidity) 5 to 95%
Operating altitude -500 to 10,000 feet
(152 to 3048 meters)
Network Equipment Building Standards (NEBS) GR-1089 and GR-63
EMC standards Same as for Cisco ASR 1001-X
Safety Standard UL60950-1

CSA C22.2 No. 60950-1-03

EN 60950-1

IEC 60950-1

AS/NZS 60950.1

 

 

 

VodaCare Services

Frustrated with expensive OEM service contracts with difficult to reach support? VodaCare can help you save 30-60% off your extended hardware service contracts with even better support than the OEM! We’ll get you connected to a certified level 4 and above engineer in as little as 10 minutes. We also offer next day hardware replacements so your system can remain online with minimal interruptions. Ask your representative about VodaCare to learn more.

Need Help?

We’ll immediately connect you to a professional to assist you.