Product Description | ISR 1100 8P Dual GE SFP Router Pluggable SMS/GPS EMEA & NA |
WAN GE | 1 |
WAN GE/SFP combo | 1 |
ADSL2/VDSL2+ | NA |
LTE Advanced (CAT6) | Yes with Pluggable Technology |
Wi-Fi 802.11ac | NA |
LAN GE | 8 |
PoE | 4 |
PoE+ | 2 |
Integrated USB 3.0 AUX/console | Yes |
Pluggable | Yes (All) |
Memory (default and maximum) | Â DRAM: 4 GB Only C1111X-8P,C1121X-8P,C1126X,C1127X, C1161X models have 8GB DRAM Â Flash: 4 GB Only C1111X-8P,C1121X-8P,C1126X,C1127X, C1161X models have 8GB Flash |
Console | Â Micro USB console (Type A). Â RJ45. Â Â Â Â Â Â Â Â |
Micro-USB port (reserved) | Â Micro-USB port to support remote LTE diagnostics and monitoring tools (Qualcomm CAIT and Spirent UDM) (USB 3.0). |
WLAN interfaces |  Multiuser Multiple-Input Multiple-Output (MU-MIMO) allows transmission of data to multiple 802.11ac Wave 2-capable clients simultaneously to improve the client experience. Prior to MU-MIMO, 802.11n and  802.11ac Wave 1 access points could transmit data to only one client at a time, typically referred to as Single-User MIMO (SU-MIMO).  802.11ac Wave 2 with 2×2:2 MIMO technology uses two spatial streams when operating in SU-MIMO or MU-MIMO mode, offering 867-Mbps rates for more capacity and reliability than competing access points.  Flexible deployment through the Mobility Express Solution is ideal for small to medium-sized deployments. Easy setup allows the 1000 Series (similar to 1815i) to be deployed on networks without a physical controller.  For more information, view the Cisco Aironet 1815i Access Point Data Sheet. |
Maximum clients | Â Maximum number of associated wireless clients: 200 per Wi-Fi radio; in total 400 clients per access point. C1109-4PLTEP and C1109-4PLTEW models come with default dual W-ANTM2050D-RPSMA external antenna and all modem have default 8.8 AP autonomous or Mobility Express release. Option to select 8.8 CAPWAP WLC image. |
Authentication and security | Â AES for Wi-Fi Protected Access 2 (WPA2). Â 802.1X, RADIUS AAA. Â 802.11r and 802.11i. |
802.11ac | Â 2×2 SU-MIMO/MU-MIMO with two spatial streams. Â Maximal Ratio Combining (MRC). Â 20-, 40-, and 80-MHz channels. Â PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz). Â Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx). Â 802.11 Dynamic Frequency Selection (DFS). Â Cyclic Shift Diversity (CSD) support. |
Software | Â Cisco IOS Software feature set: Universal Cisco IOS XE 16.6.1 Software image or later. C1112, C1113, and C1101 models support starting with IOS XE 16.8.1 Software image or later. C1118, C1111X-8P and C1109 models support with IOS XE 16.9.1 Software image or later. Â Cisco IOS Software feature set: C1120 and C1160 models Universal Cisco IOS XE 16.11.1 Software image or later. Â Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 (migration to 8.8 starting March, 2019 and 8.8 for 1101 and 1109 Models) MR1 or later. |
Serial WAN interface and protocol | Â Support for both synchronous and bisync modes. Â Synchronous maximum speed of up to 8 Mbps. Â Support for bisync modes. Â Support for network clock synchronization. Â EIA-232, EIA-449, EIA-530, EIA-530A, V.35, and X.21. |
Inline PoE | Â Optional internal adapter for inline PoE on 4 switch ports for IP phones or external wireless access points; 802.3af-compliant PoE or 802.3at-compliant PoE+. |
External power supply | Product power specifications: C111X, C1120 and C1160 Models  AC input voltage: Universal 100 to 240 VAC.  Frequency: 50 to 60 Hz.  Maximum output power: 66W (default).  Output voltages: 12 VDC.  Optional PoE and PoE+: -Single 150W power supply required for Cisco 1100-8P series router  -Single 115W power supply required for Cisco 1100-4P series router  External output voltage: 48 VDC. C1101-4PLTEPWX and C1109-4PLTE2PWX Models:  AC input voltage: Universal 100 to 240 VAC.  Frequency: 50 to 60 Hz.  Maximum output power: 66W (default iTemp for C1109-4PLTE2PWX Models).  Output voltages: 12 VDC. C1101-4P, C1101-4PLTEP,C1109-2PLTE, and C1109-4PLTE2P Models:  AC input voltage: Universal 100 to 240 VAC.  Frequency: 50 to 60 Hz.  Maximum output power: 30W (default iTemp for Models).  Output voltages: 12 VDC. |
USB 3.0 |  USB devices supported: -USB eTokens and USB flash memory  Devices USB 3.0 supports to be connected externally. View the USB Device Support Data Sheet . |
EDs | Â WWAN (green/amber). Â SIM status (green/amber). Â Received signal strength indication (RSSI) bar (green). Â 3G/LTE service (green/amber). Â GPS (green/amber). Â Speed and link for Gigabit Ethernet WAN port (green). Â Speed and link for all Fast Ethernet LAN ports (green). |
Physical dimensions (H x W x D) | C111X Models  1.75 x 12.7 x 9.6 in. (44 x 323 x 244 mm) (includes rubber feet on LTE models).  1.75 x 12.7 x 9.03 in. (42 x 323 x 230mm) (includes rubber feet on non-LTE models). C1120 Models  1.65 x 12.7 x 8.9 in. (41.9 x 322 x 226 mm). C1160 Models  1.65 x 10.8 x 7.85 in. (41.9 x 274 x 199 mm). C1101-4PLTEP and C1101-4PLTEPWX Models  1.73 x 9.75 x 6.6 in. (43.9 x 247.6 x 167.6 mm) (includes rubber feet models). C1101-4P Models  1.1 x 7.5 x 6.0 in. (27.9 x 190.5 x 152.4 mm) (includes rubber feet models). C1109-2PLTE Models  1.27 x 8.4 x 6.0 in. (32.3 x 213.4 x 152.4mm) (includes rubber feet models). C1109-4PLTE2P and C1109-4PLTE2PWX Models (ship default with dual W-ANTM2050DRPSMA Wi-Fi antennae)  1.71 x 11.16 x 9.8 in. (43.4 x 283.5 x 248.9 mm) (includes rubber feet models). Pluggable  0.85 x 2.5 x 3.88 in. (21.6 x 63.5 x 98.5 mm) |
Standard safety certifications | Â UL 60950-1.and EN 60950-1. Â CAN/CSA C22.2 No. 60950-1. Â CB to IEC 60950-1, 2 nd edition with all group differences and national deviations. |
EMC emissions | Â EN55022/CISPR22, CFR 47 Part 15, ICES003, VCCI-V-3, AS/NZS CISPR22, CNS13438, EN300-386, EN61000-3-2, EN61000-3-3, and EN61000-6-1. |
EMC immunity | Â EN55024/CISPR24, (EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11), and EN300-386. |
Radio immunity | Â EN301 489-1, EN 301 489-7, and EN301 489-24. |
Cellular radio | Â EN 301 908-1, EN 301 908-2, EN 301 511, 47 CFR Part 22, 47 CFR Part 24, and EN 301 908-13. |
Environmental operating range |  Nonoperating temperature: -4 to 149 F (-20 to 65 C).  Nonoperating humidity: 5% to 95% relative humidity (noncondensing).  Nonoperating altitude: 0 to 15,000 ft (0 to 4570 m).  Operating temperature: 32 to 104 F (0 to 40 C). C1101 support 32 to 113 F (0 to 45 C). C1109-2PLTE support 32 to 122 F (0 to 50 C). C1109-4PLTE2P and C1109-4PLTE2PW models support -4 to 131 F (-20 to 55 C).  Operating humidity: 10% to 85% relative humidity (noncondensing).  Operating altitude: 0 to 10,000 ft (0 to 3000 m at 30 C). Operating altitude: 0 to 10,000 ft (0 to 3000 m at  35 C for C1109-2PLTE models). Operating altitude: 0 to 10,000 ft (0 to 3000 m at 40 C for C1109-4PLTE2P and C1109-4PLTE2PW models). |