Switch L3 managed 16 x Gigabit SFP + 4 x 10 Gigabit SFP+ + 8 x 10/100/1000/SFP rack-mountable
In Stock

Additional information



  • Description
  • Specifications


HPE 5510 24G SFP 4SFP+ HI 1-slot Switch (JH149A) Overview


The HPE FlexNetwork 5510 HI Switch Series delivers outstanding resiliency, security, and multiservice support for medium and large enterprise networks. This switch includes enterprise-class QoS; dual, redundant power supplies with support for PoE+; 10GbE and 40GbE uplinks; 9 chassis IRF stacking; Static & RIP Routing, MACsec, OSPF, IPv6 and Energy Efficient Ethernet. The 5510 HI offers advanced technologies including OAM, CFD, multi-level QoS, MPLS, and VPLS. It can be managed with the HPE Intelligent Management Center (IMC) Software for a single view of your entire network.



Type HPE FlexNetwork 5510 24G SFP 4SFP+ HI 1-slot Switch
I/O ports and slots  16 fixed Gigabit Ethernet SFP ports; Ports 1 – 8 support MACSec 8 Combo GbE (SFP and RJ45) dual-personality 1000 Mbps port, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

 4 SFP+ 10GbE ports

 1 port expansion module slot

 Supports a maximum of 6 SFP+ ports or 2 1/10GBASE-T ports or 2 40GbE ports, with optional module

Additional ports and slots  1 dual-personality (RJ-45 or USB micro-B) serial console port

 1 RJ-45 out-of-band management port

 1 USB 2.0

1000 Mb Latency < 5 s
10 Gbps Latency < 3 s
Throughput up to 214 Mp/s
Routing/Switching capacity 288 Gb/s
Routing table size IPv4 : 32768 entries

IPv6 : 16384 entries

MAC address table size 32768 entries
Dimensions (W x D x H) 44.00 x 36.00 x 4.37 cm (17.32 x 14.17 x 1.72 in)
Weight 7.5 kg (16.53 lb)
Frequency 50/60 Hz
Maximum heat dissipation 409 BTU/hr (431.49 kJ/hr), Heat dissipation ranges from 163 BTU/hr to 498 BTU/hr, depending on power supply configuration
Voltage 100 – 240 V ac, rated (90 – 264 Vac, max)

-48 to -60 V dc, rated (-36 to -72 V dc, max) (depending on power supply chosen)

Maximum power rating 120 W
Idle power 48 W
PoE power NA
Operating temperature 0C to 45C (32F to 113F)
Operating relative humidity 10% to 90%, noncondensing
Nonoperating/Storage temperature -40C to 70C (-40F to 158F)
Nonoperating/Storage relative humidity 5% to 95%, noncondensing
Acoustic Low-speed fan: 50.5 dB, High-speed fan: 66.9 dB

ISO 7779

Safety UL 60950-1

EN 60825-1 Safety of Laser Products-Part 1

EN 60825-2 Safety of Laser Products-Part 2

IEC 60950-1

EN 60950-1

CAN/CSA-C22.2 No. 60950-1

FDA 21 CFR Subchapter J

ROHS Compliance

AS/NZS 60950-1

GB 4943 EAC (EurAsian Conformity Certification)

Emissions EMC Directive 2004/108/EC

FCC (CFR 47, Part 15) Class A

EN 61000-4-11:2004

ANSI C63.4-2009

EN 61000-3-3:2008

VCCI V-3/2012.04

EN 61000-3-2:2006+A1:2009+A2:2009

EN 61000-4-3:2006

EN 61000-4-4:2012; EN 61000-4-5:2006

EN 61000-4-6:2009

CISPR 22:2008 Class A

EN 55022:2010 Class A

EN 61000-4-29: 2000

CISPR 24:2010

EN 300 386 V1.6.1

VCCI V-3/2013.04 Class A

Immunity Generic: EN 55024

ESD: EN300 386

Management IMC – Intelligent Management Center

Command-line interface

Web browser

SNMP manager




VodaCare Services

Frustrated with expensive OEM service contracts with difficult to reach support? VodaCare can help you save 30-60% off your extended hardware service contracts with even better support than the OEM! We’ll get you connected to a certified level 4 and above engineer in as little as 10 minutes. We also offer next day hardware replacements so your system can remain online with minimal interruptions. Ask your representative about VodaCare to learn more.

Need Help?

We’ll immediately connect you to a professional to assist you.